0
  • VYRO VR Receiver
1 1

VYRO VR Receiver

$41.00 AUD
$41.00 AUD
Sale Sold out
Tax included.

About the Product

Plug it into any USB port and it handles the connection to your trackers, no extra setup beyond pairing*.

Same core design as the open-source FoxDongle, but we swapped the external antenna for a PCB trace antenna. It includes an added RF front-end enhancement circuit based on the RFX2401C, giving both a power amplifier and low-noise amplifier stage for stronger transmit range and better receive sensitivity.

Cleaner, no snapped-off SMA connectors to worry about, and in everyday use the signal strength holds up right alongside our Styria and HolyIOT receivers, so you're not giving anything up for the tidier form factor.

Specifications

  • NRF52840 MCU
  • RF front-end enhancement circuit based on the RFX2401C
  • PCB trace antenna
  • USB-C female Connector
  • Printed case with user button for easy pairing

What's in the box

  • 1x USB receiver
  • 1x USB-A to USB-C cable

Compatibility

Works with the Ibis tracker line (and pairs the same way you're used to if you've used a HolyIOT or Styria receiver before). Also works with DIY smol Slime setups, as long as you're running matching firmware versions.

*NOTE: This project is open source, so you can make it yourself. Links will be added soon!
For instant pairing, the firmware versions must match.

Low stock: 5 left
View Product Details

FAQs

IBIS trackers are full body trackers for VR that let your avatar move like you do.

No. They use a wireless USB receiver that plugs into your PC. No WIFI for tracking required.

Not using Wi-Fi means simpler setup (they come pre paired), better battery life (up to 70 hours, ~50hrs average), and fewer connection problems. Note that the range is generally limited to within your playspace, not your wifi strength.

Yes, as long as SlimeVR supports them. You can use Officials with IBIS trackers; do note, however, that the limitations of each type will still be present. Wifi may have more range, less battery life, etc.

Yes. However, unless there's an issue with your current firmware version, we recommend you don't update "just because". Firmware is still under development and may soft-brick your trackers. Rolling back to a previous version is possible, but there updates almost daily. We usually use the latest "Stable" available.


Our trackers come pre-paired. Simply plug in the receiver and turn them on. For pairing additional trackers, see here: https://docs.slimevr.dev/smol-slimes/firmware/smol-pairing-and-calibration.html#adding-more-trackers

Yes, as long as SlimeVR Server is supported on your setup. If you run on standalone, you can still use SlimeVR server on a laptop, desktop or android phone. Note that you do not need to have a PCVR capable computer to run SlimeVR server. Any basic laptop will work.

Any that use Vive trackers. VRChat, Blade & Sorcery, etc.

It's possible to get over 70 hours of battery life, but realistically if you constantly move, it's closer to 30-50 hours.

Any tracker that has more movement (ie chest, due to breathing will move it more) will drain faster. We regularly see more than 50 hours use from general playtime.

Yes. They’re great for social VR and full-body movement. including dancing. Note that your experience will vary depending on body shape, mounting calibration, and your body proportion setup.

Trackers tend to rotate over time for reasons. We recommend you read the glossary in the SlimeVR docs for further clarity. https://docs.slimevr.dev/glossary.html

It depends. If you're dancing and moving a LOT, then you may find you have to yaw reset every 10 minutes. However, if you're walking, and socializing, it could be over an hour. It just depends on your movement.

They track how your body parts rotate and move, not your exact location in the room.

Each tracker measures the rotation of a bone, and when the data from all the bones is combined, it creates a simulation of your physical poses and movements. For this reason, you should aim to use enough trackers to meet your specific Full Body Tracking needs.

Taken from https://docs.slimevr.dev/slimevr101.html#how-many-trackers-do-you-need

SlimeVR works with just 5 trackers, but the recommended number is 6. More trackers make movement look better and more accurate.

  • Trackers
  • Receiver + Extension Cable
  • 10 port charging dock + USB C Cable
  • Mounting Velcro straps
  • Quick Release Hooks
  • Chest Harness + tracker mount
  • Mounting location stickers

They work with SlimeVR, SteamVR, and games like VRChat. They also work for Quest headsets (Standalone VRChat) with the Android SlimeVR app.

They connect wirelessly to a your receiver (dongle) that you plug into your PC. To use the Android app, you'll need a USB A female to USB-C adapter. (not included)